|
|
|
View Cart
|
Byonics GPS Cables
Byonics GPS Power Adapter This adapter will plug into a 12V power supply, and then feed 5 volts to the Byonics GPS1 or GPS2 to power it. It has a male DB-9 connector to plug into the GPS, and a female DB-9 to connect to a TinyTrak3, a TNC, or a computer serial port. It is available with a cigarette lighter plug or a Powerpole for connecting to the 12V source. This adapter is NOT needed if using the GPS1 or GPS2 with the TinyTrak3Plus or TinyTrak4. 
GPAC - $25.
Byonics GPS Power Adapter with cigarette lighter plug
GPAP - $25.
Byonics GPS Power Adapter with powerpole connectorByonics GPS Power Adapter with Kenwood D700A/D710A/D7A Interface This adapter is similar to the adapter above, but has a 3/32" (2.5mm) stereo plug rather than a female DB-9 so it can plug directly into a Kenwood D700A, D710A or Kenwood D7A radio. It also will plug into a 12V power supply, and then feed 5 volts to the Byonics GPS1 or GPS2 to power it. It has a male DB-9 connector to plug into the GPS. It is available with a cigarette lighter plug or a Powerpole for connecting to the 12V source.
GPAKC - $25.
Byonics GPS Power Adapter with Kenwood D700A/D710A/D7A Interface and cigarette lighter plug
GPAKP - $25.
Byonics GPS Power Adapter with Kenwood D700A/D710A/D7A Interface and powerpole connectorByonics GPS USB Adapter This USB adapter will connect the Byonics GPS1 or GPS2 to a computer USB port. The GPS will be powered from, and also send position data to, the computer. This adapter is not for use with the TinyTrak3 or TinyTrak3Plus.
GUA - $20.
Byonics GPS USB AdapterDownload Windows 2000/XP Driver Download Windows Vista Driver While these cables have been confirmed to work on the gps listed, you must use them at your own risk. Byonics is not responsible for damage resulting from these cables. See More Byonics Cables |