Byonics
Byonics
TinyTrak3
TinyTrak4
Cables
Micro-Trak
   •MT RTG
   •MT AIO
   •Micro-Fox
   •MT-TT4
   •MT 8000FA
   •MT 300
   •MT 8000
   •Micro-Amp 3
   •Antenna
   •Micro-Volt 12
GPSs
PocketTracker
PocketFox
WXTrak
TinyPack
PicCon
APO3
PICPAC
GST-1
Downloads
Links
Testimonials View Cart Contact
Home

GoogleAPRS

Find us on Facebook
Micro-Trak VHF Antennas

These SMA antennas are all compatible with all the Micro-Trak transmitters.
Micro-Trak V2 and V4 Rubber Duck Antennas

These factory made antennas will work with all Micro-Trak transmitters, as well as any handheld radio with an SMA antenna jack. The V2 is longer with a sturdy whip, while the V4 is more compact and flexible.

SpecificationsV2 AntennaV4 Antenna
Manufacturer P/NNA-771NA-666
Frequency144-148 MHz144-148 MHz
Gain2.15 dB2.15 dB
Max Power50 Watts10 Watts
Length15.5 in / 39.5cm9 in / 23 cm
Whip diameter4 mm2.2 mm
Weight1.2 oz0.6 oz
ConnectorSMA maleSMA male
Price$19
Add To Cart
$19
Add To Cart



Micro-Trak VHF Antenna V3
The Micro-Trak VHF Antenna V3 is a factory made external VHF antenna with a "Hershey-Kiss" magnet mount base for use with many hand held radios, and the Micro-Trak APRS transmitters. This antenna whip is very flexible. If using a Micro-Trak in a vehicle, an external antenna, such as this one, is highly recommened.

Specifications
Frequency: 144-148 MHZ
Gain: 3.0dB
Length: 20 inches
Weight: 2.7 ounce
Connector: SMA Male
Cable: RG-174 10 feet
Magnet Diameter: 1.25 inches

Add To Cart Micro-Trak VHF Antenna V3 - $19.
Micro-Trak VHF Antenna V6
The Micro-Trak VHF Antenna V6 is center fed 2-meter dipole antenna that comes with a 12" SMA coax. It provides a considerable signal boost over the rubber duck alternatives, and was primarily deisgned for high altitude balloons.

Add To Cart Micro-Trak VHF Antenna V6 - $40.