Byonics - MicroTrak

	View Cart - Home

TinyTrak3
TinyTrak4
Cables
Micro-Trak
   •MT AIO
   •MT RTG
   •MT-TT4
   •MT 300
   •MT BFT
   •MT 8000
   •MT 8000FA
   •Micro-Amp
   •Antenna
   •MV 12
GPSs
PocketTracker
PocketFox
WXTrak
TinyPack
PicCon
APO3
PICPAC
DSP-RDF
GST-1
Downloads
Links
Testimonials View Cart Contact
Home

GoogleAPRS

Micro-Trak BFT

VHS Products has created the Micro-Trak BFT, a 2-meter FM transmitter combined with a TinyTrak 3 controller chip, and an adjustable 35W power amplifier that provides an easy and inexpensive way to build a small APRS tracker. Just plug in a GPS receiver, such as the Byonics GPS2, and track!

35 Watt high powered APRS transmitter (adjustable)
Single channel, crystal controlled 144.390 only
Runs on automotive power supply
Supports all the latest Byonics TinyTrak3 features.
Designed to offer the most bang for the buck, and is ideal for areas with sparse digipeater coverage
No need to tie up an expensive radio for APRS tracking
No complicated radio cabling
Simple 2 wire GPS connection

Micro-Trak BFT is available on the North American APRS frequency of 144.39 MHz, transmits up to 35 watts, and is sold as a built and tested unit. The Micro-Trak BFT PCB measures 2.4 inch X 4.7 inches.

Please Note:Micro-Trak BFT is designed to allow users to operate APRS in areas with poor digipeater coverage, where more power than normal is needed. It should not be used in areas with many digipeaters, or areas where only a couple of watts is needed to get into the network.

Additional Micro-Trak Products:
Micro-Trak AIO - An self contained portable tracker.
Micro-Trak TT4 - TinyTrak4 with a radio transceiver.
Micro-Trak 300 - The original 300mW Micro-Trak, without the amplifier.
Micro-Trak 8000 FA - An 8 watt, frequency agile Micro-Trak.
Micro-Trak 8000 - An 8 watt version of the Micro-Trak 300.
Micro-Trak 200 FA - A frequency agile version of the Micro-Trak 300.
Micro-Trak VHF Antenna - An antenna for the Micro-Trak products.
Micro-Volt 12 - A 12 volt regulated power supply for Micro-Trak products.

For additional information, please contact

Sorry - Out of stock

Documentation:
Micro-Trak BFT Manual v1.0 - Current version

After ordering a kit be sure to download the TinyTrak3 configuration software and documentaion.
Download TINYTRAK3.ZIP Right click the link and choose "Save As..."
Please do not distribute TinyTrak3 software, firmware, or documentation without written permission from the author.

Note: Micro-Trak BFT is a transmitter only. It does not receive radio signals, and therefore may occasionally transmit over other stations.

Note: This transmitter operates on amateur radio frequencies, and requires a valid amateur radio license to use.